MadMax Trade Supply

Home › Guides

How to measure a pool or spa filter cartridge for a replacement

Short answer: First look for the filter model on the tank label or a part number on the cartridge end cap, and match that. If neither is readable, measure the old cartridge: overall length, outside diameter, the size of the top and bottom center openings, and note the end cap style (open hole, closed, threaded or with a handle). Replacement listings are matched by those details.

Safety: Turn off the pump and open the air relief valve before opening the filter tank.

Step by step

  1. Check the tank label. The filter model, for example a Hayward, Pentair or Jandy model number, is usually on a label on the tank. Our cartridge names list the filter models each one is sold for.
  2. Check the end cap. Many cartridges have the maker's part number molded or printed on an end cap.
  3. Measure length. Measure end to end, including the end caps.
  4. Measure diameter. Measure straight across the widest part of the pleats or end cap.
  5. Measure the openings. Measure the inside diameter of the center hole at each end, and note whether an end is closed, threaded or has a handle.

Pool and spa cartridges

Common questions

Do multi-cartridge filters use the same cartridge in every slot?

Not always. Count the cartridges in the tank and check the filter model; replacement packs are sold by filter model.

How often should a pool cartridge be replaced?

Replace it when cleaning no longer brings pressure back near the clean reading, or when pleats or end caps are damaged. See our pressure guide.

Can I use a cartridge that is slightly shorter?

Use the size listed for your filter model. A cartridge that does not seal at both ends lets water bypass the filter.

Shop pool and spa filters Hayward cartridge cross-reference Filter pressure high?

Related categories: Pool & Spa Filter Cartridges. General information only; follow the equipment maker's instructions and local codes. Updated 2026-11-14.